| Removal and Installation | | -
Empty the windshield washer reservoir. | | | -
Detach the right-hand front wheel.
For additional information, refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).
| | | -
Remove the right-hand wheel arch trim panel. | 4. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Windshield washer upper reservoir lower retaining bolt 2 - Windshield washer upper reservoir upper retaining bolt 4 - Front windscreen washer pump connector 6 - Headlamp washer pump connector 7 - Headlamp washer pump hose – 5. To install, reverse the removal procedure. Removal Details Item 3 : Windshield washer pump hoses. | | -
Unclip the reservoir hoses. | Item 5 : Windshield washer upper reservoir | | -
Pull the connecting piece of the lower reservoir from the upper reservoir. | | | -
Pull the reservoir from the filler neck. | Installation Details Item 8 : Headlamp washer pump – | | -
Coat the pump rubber seal on the headlamp washer with soap solution prior to installation. | | 
