| Removal and Installation Removal | | -
Remove the liftgate trim panel. | | | -
Detach the liftgate latch cable from the liftgate lock cylinder retaining plate | | | -
Disconnect the liftgate latch cable from the liftgate lock cylinder actuator. | | | -
Disconnect the liftgate latch actuator cable from the liftgate latch actuator. - Push the cable from the retaining bracket.
- Rotate the end of the cable clockwise to release it from the liftgate latch actuator.
| | | -
Detach the liftgate latch from the liftgate. | | | -
Detach the liftgate ajar switch and remove the liftgate latch. | Installation | | -
To install, reverse the removal procedure. | | |
