Removal and Installation Removal | -
Disconnect the hood latch release cable from the hood latch. | | -
Detach the battery junction box (BJB) from the radiator grille opening panel reinforcement. | | -
Remove the battery front side cover. | | -
Disconnect the cooling fan motor electrical connectors. - Detach the electrical connectors from the fan shroud.
| | -
Detach the air conditioning line from the cooling fan shroud. | | -
Remove the cooling fan shroud left-hand retaining nut. | | -
Remove the cooling fan shroud right-hand retaining nut. | | -
Remove the coolant distribution pipe retaining bolts and secure it to one side. | | -
Remove the cooling fan motor and shroud. | Installation | -
To install, reverse the removal procedure. | | |