Ford Ranger Workshop Service and Auto Repair Manuals

Remove the engine cover.

Disconnect the negative battery cable. For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

Remove the air intake pipe and breather chamber.

Remove the timing belt. For additional information, refer to: Timing Belt (303-01 Engine - 2.5L Duratorq-TDCi (WL) Diesel/3.0L Duratorq-TDCi (WL) Diesel, Removal and Installation).

Remove the camshaft. For additional information, refer to: Cylinder Head (303-01 Engine - 2.5L Duratorq-TDCi (WL) Diesel/3.0L Duratorq-TDCi (WL) Diesel, Removal and Installation).

6. Remove the components in the order indicated in the following illustration(s) and table(s).

7. To install, reverse the removal procedure.

Installation Details

Item 2 : Pivot

Item 1 : Rocker arm

If a new rocker arm is used, set dimension A as follows. Dimension A 0.0-4.0 mm {0.0-0.115 in}.