Removal and Installation Special Tool(s) | 303-1272 Locking Tool, Flywheel | Removal NOTE:Removal steps in this procedure may contain installation details. | -
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). Refer to: Accessory Drive Belt (303-05E Accessory Drive - 2.2L Duratorq-TDCi (DW) Diesel, Removal and Installation). Refer to: Starter Motor (303-06E Starting System - 2.2L Duratorq-TDCi (DW) Diesel, Removal and Installation). | | -
CAUTION:Make sure that a new bolt is installed. Torque: Stage 1: 70 Nm Stage 2: 82° | | -
WARNING:Make sure that the wiring harnesses are correctly located. Torque: 8 Nm | | -
NOTE:This step is only necessary when installing a new component. | Installation | -
To install, reverse the removal procedure. | | |