S2000 L4-2.2L (2004)
6. Pack the inboard joint with the joint grease included in the new driveshaft set.
Grease quantity
Inboard joint: 150 - 160 grams (5.3 - 5.6 ounces)
7. Fit the inboard joint onto the driveshaft, and note these items:
^
Reinstall the inboard joint onto the driveshaft by aligning the marks (A) on the inboard joint and the rollers.
^
Hold the driveshaft so the inboard joint points up to prevent it from falling off.
8. Adjust the inboard joint until the rollers are in the middle of the joint.
9. Fit the boot (A) ends onto the driveshaft (B) and the inboard joint (C).