S2000 L4-2.2L (2004)
10. Install the boot bands with the band end toward to front of the vehicle.
11. Pull up the slack in the band by hand.
12. Mark a position (A) on the band 10 - 14 mm (0.4 - 0.6 inch) from the clip (B).
13. Thread the free end of the band through the nose section of the commercially available boot band tool KD-3191 or equivalent (A), and into the slot
on the winding mandrel (B).
14. Place a wrench on the winding mandrel of the boot band tool, and tighten the band until the marked spot (C) on the band meets the edge of the
clip.