Workshop Manuals Factory service & repair Hummer
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Hummer H2 V8-6.2L (2008)03 · Maintenance
03 · Maintenance

Vehicle Lifting: Service Precautions (page 4 of 5)

Make
Hummer
Model
H2
Engine
V8-6.2L
Year
2008
Section
Vehicle Lifting
MaintenanceService Precautions · page 4 of 5
background image

Position the rear lift under the axle housing tubes on each side of the differential.

Do not damage the stabilizer bar.

Jacking

When you are lifting a vehicle with a vehicle jack or a floor jack, block the wheels at the opposite end from which you are lifting. Use jack stands to
provide additional support.

Under the Frame Rails

Important:  The floor jack pad must not contact rocker panel or the floor pan.

Position the floor jack pad under the frame rail pad.

Under the Rear Differential

Position the floor jack pad under the center of the rear axle differential.

Do not damage the establisher bar.

Under the Rear Spring Hanger

Position the jack under the rear spring hanger.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2008 Hummer H2 6.2L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.