isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Primary Throttle Valve Full Opening Angle|Page 1195 > < Primary Throttle Valve Full Opening Angle|Page 1193
Page 1
background image

Throttle Plate - Carb.: Adjustments
Primary Throttle Valve Clearance

I-Mark

1.

Place choke valve in the full open position.

2.

Open throttle valve slowly while pushing choke valve lightly in the closing direction. Set choke valve to second stage of the fast idle cam.

3.

Check primary throttle valve clearance. On automatic transmission models, clearance should be .0323 inch. On manual transmission models,
clearance should be .0256 inch. 

Primary Throttle Valve Full Opening Angle|Page 1195 > < Primary Throttle Valve Full Opening Angle|Page 1193