Ascender 4WD L6-4.2L (2003)
Vehicle Lifting: Service and Repair
Lifting and Jacking the Vehicle
Caution:
-
To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle
is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed.
-
To avoid any vehicle damage, serious personal injury or death, always use the jackstands to support the vehicle when lifting the
vehicle with a jack.
Note: Perform the following steps before beginning any vehicle lifting or jacking procedure:
-
Remove or secure all of the vehicle's contents in order to avoid any shifting or any movement that may occur during the vehicle lifting or
jacking procedure.
-
The lifting equipment or the jacking equipment weight rating must meet or exceed the weight of the vehicle and any vehicle contents.
-
The lifting equipment or the jacking equipment must meet the operational standards of the lifting equipment or jacking equipment's
manufacturer.
-
Perform the vehicle lifting or jacking procedure on a clean, hard, dry, level surface.
-
Perform the vehicle lifting or jacking procedure only at the identified lift points. DO NOT allow the lifting equipment or jacking equipment to
contact any other vehicle components.
Note: Failure to perform the previous steps could result in damage to the lifting equipment or the jacking equipment, the vehicle, and/or the
vehicle's contents.
Use only the prescribed lift points when elevating the vehicle.
Vehicle Lifting Points