Hombre S Regular Cab 4WD V6-4.3L (1999)
5. Remove the outboard lining from the caliper.
Installation Procedure
Caution: Do not move the vehicle until a firm brake pedal is obtained. Failure to obtain a firm pedal before moving vehicle may result in
personal injury.
Important: Before installing new brake pads, wipe the outside surface of the caliper boot clean. Use denatured alcohol.
1. Install the outboard lining.
2. Install the retainer spring on the inboard brake lining.
3. Install inboard lining in the caliper.
Notice: Make sure the brake hose is not twisted or kinked after installation. Damage to the hose could result.
4. Install the caliper.
Rear Pads
Brake Pads Replacement - Rear
Removal Procedure
Important: Do not disconnect the brake hose from the caliper.
1. Remove the caliper.
Notice: Do not allow the brake components to hang from the flexible brake hoses. Damage to the brake hoses could result.
2. Suspend the caliper