Hombre S Regular Cab 4WD V6-4.3L (1999)
1. Connect the electrical connector and the CPA retainer.
2. Connect the inflator module.
3. Connect the electrical connector.
4. Connect the SRS lead wire to the clip on the steering wheel.
5. Connect the SRS lead wire to the clip on the inflator module.
Important: Make sure that the SRS wires do not get pinched during installation of the inflator module.
6. Install the inflator module by pressing the inflator module firmly onto the steering wheel to engage and latch the leaf springs on the four notched
Pins.
7. Enable the SRS system. Refer to Enabling the SRS.
