Hombre S Regular Cab 4WD V6-4.3L (1999)
Steering Wheel: Service and Repair
Steering Wheel Replacement
Removal Procedure
Tools Required
J 1859-A Steering Wheel Puller
1. Remove the inflator module. Refer to Restraint Systems; Air Bag Systems.
2. Remove the horn plunger from the steering column by pressing inward to the stop and rotating horn plunger 90 degrees.
3. Disconnect the steering wheel electrical connector.
4. Remove the nut that retains the steering wheel to the steering wheel shaft.
5. Mark the steering wheel to the steering wheel shaft. This will ensure proper alignment during installation.