Hombre S Regular Cab 4WD V6-4.3L (1999)
Notice: When removing the steering wheel, use only the specified steering wheel puller. Do not hammer on the end of the steering column shaft.
Hammering could loosen the plastic injections which maintain the steering column rigidity.
6. Remove the steering wheel using J 1859-A.
Installation Procedure
Important: Ensure that the turn signal on the multi function switch is in the neutral position when installing the steering wheel.
1. Align the mark on the steering wheel and steering shaft.
2. Install the steering wheel to the steering wheel shaft.
3. Install the steering wheel retaining nut to the steering shaft.
Tighten
Tighten the nut that retains the steering wheel to the steering shaft to 41 N.m (30 lb ft).
