Hombre S Regular Cab 4WD V6-4.3L (1999)
2. Lubricate the slip joint.
3. Install the yoke and cross assembly onto the pinion flange.
4. Align the reference marks on the pinion flange and the propeller shaft rear yoke. Seat the yoke properly.
5. Install the retainers.
6. Install the bolts into the pinion flange.
Tighten
-
Tighten the rear pinion flange bolts to 20 N.m (15 lb ft) for 2.2L engines.
-
Tighten the bolts to 45 N.m (33 lb ft) for 4.3L engines.
