Hombre XS Space Cab L4-2.2L CPC (1997)
3.
Install the brake pipe retaining clip, supplied from the Front Brake Pipe Assembly Kit (Part No. 8-88880-009-0), onto the front brake pipe (Figure
2).
4.
Insert the brake pipe retaining clip bolt, supplied from the kit, through the brake pipe retaining clip and instill it into the hole in the front cross
member where the wire harness retainer was removed in step 2 (Figure 3).
5.
Secure the wire harness to the front brake pipe, left of the new brake pipe retaming clip bolt, using the plastic tie wrap supplied from the kit
(Figure 4). Discard the new front brake pipe supplied from the kit. It is not needed for this repair.
6.
Reconnect the battery ground cable and reset all radio station presets.
INSTALLING THE FRONT BRAKE PIPE AND ADDITIONAL BRAKE PIPE RETAINING CLIP
1.
Record any radio station presets; then disconnect the battery ground cable.
