Hombre XS Space Cab L4-2.2L CPC (1997)
Refrigerant Pressure Sensor / Switch: Service and Repair
HD6/HT6
Remove or Disconnect
1. Recover the refrigerant.
2. Disconnect the electrical connector from the switch in the rear bead of compressor.
3. Remove the switch retaining ring using J 5403 internal snap ring pliers.
4. Remove the switch from the compressor.
5. Remove old O-ring seal from the switch cavity using J 95534-01 O-ring removal tool.
If existing control switch is reinstalled in the compressor, a new O-ring seal must be used and preferably a new retainer ring should also be used. A