Hombre XS Space Cab L4-2.2L CPC (1997)
11. Twist together one connector wire lead to one deployment wire. The connection must be mechanically secure.
12. Bend flat the twisted connection that you made in the previous step. Secure the connection by wrapping tightly with electrical tape. This will also
insulate the connection.
13. Twist together, bend and tape the remaining connector wire lead to the remaining deployment wire.
14. Connect the deployment harness to the inflator module yellow 2-way connector at the base of the steering column.
15. Route the deployment harness out the driver side of the vehicle.
16. Be sure to clear the inside of the vehicle and the area surrounding the vehicle of any people. Clear the vehicle of all loose or flammable objects.
17. Stretch the deployment harness to its full length.
