isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Coil Spring|Page 4400 > < Coil Spring|Page 4398
Page 2
background image

4. Loosen the shackle to frame bolt, washers, and nut.

5. Loosen the front hanger nut, washers and bolt.
6. Remove the spring assembly from the vehicle.
7. Loosen the shackle to spring nut, washers, and spring bolt.
8. Remove the shackle.
9. After removing the old spring assembly place the new shackle onto the rear spring eye then insert the spring bolt,washers, and nuts but only hand

tighten them.

10. Place the spring assembly onto the vehicle.
11. Attach the spring to front bracket using a bolt, washers, and nut but only but only hand tighten them.
12. Attach the shackle to the frame bolt, using the washers, and nut but only but only hand tighten them.
13. Next, remove the spring support them install the spare tire.

Coil Spring|Page 4400 > < Coil Spring|Page 4398