Rodeo S 2WD L4-2.2L (1999)
Inspection
1. Raise the vehicle. When placing the lift points be sure to keep the rear lifting points at least 300mm (12 inches) ahead of the rear lower trailing link
front mounting bracket. This spacing is necessary for inspection and repair accessibility.
2. Visually inspect the Rear Lower Trailing Link Front Mounting Bracket inspection area. Use the Visual Comparison Photo (P/N 2-90SVA-003-0) or
Figure 1 for reference. If most of the frame coating is still in place and very little surface rust is present apply Noxudol 300 (Go to "Condition One:
Apply Noxudol 300" in this bulletin). If most frame coating is missing and excessive rust is present go to the next step.
Note:
If the vehicle is equipped with side steps/running boards it is necessary to remove them in order to complete the following steps.