Rodeo S 2WD L4-2.2L (1999)
^
Remove the two mounting screws for the hood release lever and the mounting screw on the lower right corner of the cover (see figure 1).
^
Pull the hood release lever forward and turn it sideways to unclip it from the cover (see figure 2).
^
Gently pry out the cover to release the four clips, unplug the electrical connectors, and remove the cover.
3.
Remove the seven (7) mounting screws in the lower steering column cover, remove the upper and lower cover.
4.
Set the parking brake and move the shift lever to "L" position and remove the ashtray.
5.
Remove the four (4) clips and one (1) screw from the lower cluster assembly, then unplug the cigarette lighter connectors (see figure 3).
6.
Remove two (2) rear console screws, and unplug the connectors from the POWER and WINTER switches.
7.
On 4WD models remove the knob from the transfer control lever.
