Trooper LS V6-3.5L (1998)
Torque: 78 Nm (57.5 ft. lbs.)
9. Install drive belt by pushing down the auto tensioner using spanner as shown in the removal step of drive belt.
10. Install cooling fan and clutch assembly and tighten the fixing bolts to the specified torque.
Torque: 10 Nm (88.5 inch lbs.)
11. Install upper fan guide and clip both side and tighten the fixing bolts to the specified torque.
Torque: 4 Nm (35.4 inch lbs.)
12. Install engine harness and tighten the fixing bolts of the retaining clip and bracket to the specified torque.
Torque: 4 Nm (35.4 inch lbs.)
13. Connect radiator upper and lower hoses and clip them securely.
14. Connect vacuum hoses of those which were disconnected in the removal step.
15. Connect wiring connectors and bonding cable of those which were disconnected in the removal step.
16. Install air cleaner element and air cleaner duct assembly, and clip the both end securely.
17. Connect MAP sensor connector, IAT sensor connector and PCV hose.
18. Install engine cover mating with the dowels.