Bonnet lid WEATHERSTRIPS - R.R.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Compartment lids › Bonnet lid WEATHERSTRIPS - R.R.
‹ Prev Bonnet lid SAFETY OPENING DEVICE - R.R. or repairNext › TELESCOPIC STRUT (one), left or right, supporting bonnet lid - R.R.
Body fittingsBonnet lid WEATHERSTRIPS - R.R.
Bonnet lid WEATHERSTRIPS - R.R.
Removing
- Open the bonnet.
1. Release the wind seal (1b) using the tool (1a) and remove it.
| Description | Code | Function | |
|---|---|---|---|
| 1a | Knife | 1.878.077.000 | Removing bonnet wind seal |
Refitting
- Check the condition of the wind seal.
- Position the seal, fitting the retaining buttons in place until the click is heard.
- Close the bonnet.
‹ Prev Bonnet lid SAFETY OPENING DEVICE - R.R. or repairNext › TELESCOPIC STRUT (one), left or right, supporting bonnet lid - R.R.
Parts & tools for this job For 2002 Lancia Thesis
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Lancia touch up paint
- PARTPanel clip assortmentSearch: Lancia panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.