Boot housing SEAL - R.R.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Compartment lids › Boot housing SEAL - R.R.
‹ Prev Boot lid LOCK striker - R.R.Next › Fuel filler flap control MOTOR - R.R. and check closing supply line
Body fittingsBoot housing SEAL - R.R.
Boot housing SEAL - R.R.
Removing
1. Release the seal from the boot lid and remove it.
Refitting
- Check the condition of the seal.
- If it is not okay, replace the seal.
- Fit the seal in position.
1. Check that the reference (1a) on the actual seal is aligned with the boot lid lock striker (1b).
- Check that the seal adheres perfectly to the bodyshell flange.
‹ Prev Boot lid LOCK striker - R.R.Next › Fuel filler flap control MOTOR - R.R. and check closing supply line
Parts & tools for this job For 2002 Lancia Thesis
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Lancia touch up paint
- PARTPanel clip assortmentSearch: Lancia panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.