Boot lid LOCK - R.R.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Compartment lids › Boot lid LOCK - R.R.
Body fittingsBoot lid LOCK - R.R.
Boot lid LOCK - R.R.
Removing
- Disconnect the negative battery terminal.
See in Op. 7025B18 Boot LID LINING - R.R.
1. Undo the bolts (1a) and the boot lid opening idler (1b).
2. Extract the lock from the housing.
1. Disconnect the electrical connector.
| Description | Connector | |
|---|---|---|
| 1 | Boot lock geared motor | N057 |
Refitting
- Connect the electrical connector.
| Description | Connector | |
|---|---|---|
| Boot lock geared motor | N057 |
- Fit the boot lid lock in the housing and connect the opening idler.
- Tighten the bolts fixing the boot lid lock to torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 1.6 | Bolt | BOOT LID LOCK | M8 |
See in Op. 7025B18 Boot LID LINING - R.R.
- Connect the negative battery terminal.
Parts & tools for this job For 2002 Lancia Thesis
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Lancia touch up paint
- PARTPanel clip assortmentSearch: Lancia panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.