Automatic transmission failure signal
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Gear change › Automatic transmission failure signal
Fault diagnosisAutomatic transmission failure signal
AUTOMATIC TRANSMISSION FAILURE SIGNAL
When the key is turned to the ON position, the message "automatic transmission fault" appears on the matrix display.
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 1 | ALL OK | PROBLEMS ENCOUNTERED | ACTION | |
| Move on to Step | ||||
| 2 | ALL OK | PROBLEMS ENCOUNTERED | ACTION | |
| Move on to Step | See in Op. 5560B11 ANALOGUE CONTROL PANEL - R.R. or Replace | |||
| 3 | ALL OK | PROBLEMS ENCOUNTERED | ACTION | |
When the key is turned to the ON position, the message "automatic transmission fault" appears on the matrix display.
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Connect the Examiner or Examiner plus diagnostic equipment to the diagnostic socket:
| Move on to Step | Presence of errors in the control unit | Continue following the instructions for the diagnostic equipment | |
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Keeping the diagnostic equipment (Examiner or Examiner plus) connected to the diagnostic socket, check the operation of the matrix display in active diagnosis | Move on to Step | Instrument panel/display faulty | Replace instrument panel | |
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | ||||
Parts & tools for this job For 2002 Lancia Thesis
- PARTTransmission filter kitSearch: Lancia Thesis 2002 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Lancia automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.