Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)22 · Fault diagnosis
22 · Diagnostics

Gearbox trim led does not light up

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Gear change › Gearbox trim led does not light up
Fault diagnosisGearbox trim led does not light up

GEARBOX TRIM LED DOES NOT LIGHT UP

Automatic Transmission

When the ignition is turned on, the ideograms on the gearbox trim do not light up.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1ALL OKPROBLEMS ENCOUNTEREDACTION
Move on to Step(Wiring Diagram ) E7050 AUTOMATIC TRANSMISSION
(Wiring Diagram ) E7050 AUTOMATIC TRANSMISSION
(Wiring Diagram ) E7050 AUTOMATIC TRANSMISSION
2ALL OKPROBLEMS ENCOUNTEREDACTION
Move on to Step
3ALL OKPROBLEMS ENCOUNTEREDACTION
Move on to Step
4ALL OKPROBLEMS ENCOUNTEREDACTION

When the ignition is turned on, the ideograms on the gearbox trim do not light up.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1CHECK ELECTRICAL CIRCUITALL OKPROBLEMS ENCOUNTEREDACTION

Check: Gearbox trim power supply

  • Protective fuse in dashboard junction unit
  • Correct connections between dashboard junction unit and trim
  • Gearbox
  • Correct connections between gearbox trim and earth
  • Earth

    (Wiring Diagram ) E7050 AUTOMATIC TRANSMISSION

Move on to Step1. Power supply not correct

1. Restore correct supply

(Wiring Diagram ) E7050 AUTOMATIC TRANSMISSION

2. Connections not correct

2. Restore the correct connections

(Wiring Diagram ) E7050 AUTOMATIC TRANSMISSION

3. Fuse blown3. Change the fuse (find out what caused it to blow)
4. Earth defective

4. Repair the earth contact:

(Wiring Diagram ) E7050 AUTOMATIC TRANSMISSION

2GEARBOX TRIM CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the gearbox trimMove on to StepGearbox trim defectiveReplace the gearbox trim
3LIGHTING CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Check:

  • The condition of the backlight LEDs

    (Wiring Diagram ) E7050 AUTOMATIC TRANSMISSION

Move on to StepLEDs defectiveReplace the LEDs
4CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.