Workshop Manuals Factory service & repair Lancia
Lancia Thesis Factory Service Manual (2002-2009)22 · Fault diagnosis
22 · Diagnostics

Gearbox control hardening

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Gear change › Gearbox control hardening
Fault diagnosisGearbox control hardening

GEARBOX CONTROL HARDENING

It is difficult to engage the gears in all circumstances.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1GEARBOX CONTROL CABLES FASTENING CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fastenings for the gearbox control cables are not slack or incorrectly securedMove on to StepCables incorrectly fastenedFasten the gearbox control cables correctly
2GEARBOX CONTROL CABLES CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the flexible gearbox control cables and make sure they slide correctlyMove on to StepFlexible gearbox cables faulty

Replace the gearbox control cables

See in Op. 2125C20 Gearbox HAND CONTROL ASSEMBLY - R.R. and overhaul

3GEAR LEVER CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the gear lever ball joint and make sure it is working properlyMove on to StepGear lever ball joint faulty

Replace the gear lever

See in Op. 2125C20 Gearbox HAND CONTROL ASSEMBLY - R.R. and overhaul

4CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.