Lower front track control ARMS R.R.

Operation 4410B49 · FRONT SUSPENSION TRACK CONTROL ARMS

Removing

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 4410A80 Lower fork connecting front suspension SHOCK ABSORBER to LOWER TRACK CONTROL ARM (one), left or right - R.R.

1. Undo the nuts fixing the track control arms to the steering knuckle.

1. Extract the front track control arm head (1a) using a USAG-FACOM U.16A32 type extractor (1b) or a similar tool.

1. Extract the front track control arm head (1a) using a USAG-FACOM U.16A32 type extractor (1b) or a similar tool.

1. Undo the fixing bolts.

2. Remove the front lower track control arm.

1. Undo the bolt fixing the rear lower track control arm.

2. Remove the rear lower track control arm from the housing.

Refitting

- Position the rear lower track control arm in the special housing and secure it tightening the bolt to the recommended torque.

- Position the rear lower track control arm ball joint and secure it to the steering knuckle tightening the nut to the recommended torque.

- Position the front lower track control arm and secure it to the front suspension frame tightening the bolts to the recommended torque.

- Position the rear lower track control arm in the special housing and secure it tightening the nut to the recommended torque.

See in Op. 4410A80 Lower fork connecting front suspension SHOCK ABSORBER to LOWER TRACK CONTROL ARM (one), left or right - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

See in Op. 4450A10 FRONT WHEEL GEOMETRY - Check using optical equipment - Includes front wheel toe-in adjustment if necessary