Lower rear track control ARM R.R.

Operation 4410B47 · FRONT SUSPENSION TRACK CONTROL ARMS

Removing

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

1. Undo the nut fixing the track control arm to the steering knuckle.

1. Extract the end (1a) of the rear track control arm using a USAG-FACOM U.16A32 type extractor (1b) or a similar tool.

1. Undo the bolt fixing the rear lower track control arm.

2. Remove the rear lower track control arm from the housing.

Refitting

- Position the arm in the special housing and secure it by tightening the bolt to the recommended torque.

- Position the ball joint and secure it to the steering knuckle tightening the nut to the recommended torque.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

See in Op. 4450A10 FRONT WHEEL GEOMETRY - Check using optical equipment - Includes front wheel toe-in adjustment if necessary