Rear suspension ANTI-ROLL BAR - R.R.

Operation 4420C10 · ANTI-ROLL BAR/SUSPENSION RODS REAR

Removing

- Position the vehicle on a lift.

See in Op. 4450B13 Rear WHEELS (two) - R.R.

See in Op. 7055B45 Right rear wheel arch liner - R.R.

See in Op. 4420A35 Rear suspension SHOCK ABSORBERS - R.R.

See in Op. 1076B20 Rear exhaust SILENCER - R.R.

See in Op. 4420D10 REAR SUSPENSION AXLE - R.R.

1. Undo the nuts fixing the anti-roll bar joint.

2. Undo the bolts fixing the anti-roll bar to the axle.

3. Remove the anti-roll bar from the rear axle.

Refitting

- Fit the anti-roll bar on the rear axle.

- Tighten the bolts fixing the anti-roll bar to the axle to torue.

- Tighten the nuts fixing the anti-roll bar joint to the stub axle to torque.

See in Op. 4420D10 REAR SUSPENSION AXLE - R.R.

See in Op. 1076B20 Rear exhaust SILENCER - R.R.

See in Op. 4420A35 Rear suspension SHOCK ABSORBERS - R.R.

See in Op. 7055B45 Right rear wheel arch liner - R.R.

See in Op. 4450B13 Rear WHEELS (two) - R.R.

See in Op. 4450A40 REAR WHEEL GEOMETRY - Check using optical equipment - Includes rear wheel toe-in adjustment if necessary

- Remove the vehicle from the lift.