Engine oil vapour recirculation flame trap - repl.
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Exhaust emission control system › Engine oil vapour recirculation flame trap - repl.
Engine oil vapour recirculation flame trap - repl.
Removing
Proceed with removal - 1048A10 air cleaner filtering element - replace.
Proceed with removal - 1080D24 engine oil vapour intake pipe - r + r.
1. Remove the engine oil vapour recirculation flame trap.
Removing
Proceed with removal - 1048A10 air cleaner filtering element - replace.
Proceed with removal - 1080D24 engine oil vapour intake pipe - r + r.
1. Remove the engine oil vapour recirculation flame trap from its seat.
Refitting
Refit the engine oil vapour recirculation flame trap.
Proceed with refitting - 1080D24 engine oil vapour intake pipe - r + r.
Proceed with refitting - 1048A10 air cleaner filtering element - replace.
Refitting
Fit the engine oil vapour recirculation flame trap in its seat.
Proceed with refitting - 1080D24 engine oil vapour intake pipe - r + r.
Proceed with refitting - 1048A10 air cleaner filtering element - replace.
Parts & tools for this job For 2003 Lancia Ypsilon
- PARTEngine gasket setSearch: Lancia Ypsilon 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.