Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Lancia Ypsilon Factory Service Manual (2003-2011)22 · Fault diagnosis
22 · Diagnostics

Centre brake light ("third brake light") not working

Make
Lancia
Model
Ypsilon Factory Service Manual
Year
2003–2011
Section
Lights › Centre brake light ("third brake light") not working
Fault diagnosisCentre brake light ("third brake light") not working

CENTRE BRAKE LIGHT ("THIRD BRAKE LIGHT") NOT WORKING

When the brake pedal is pressed, with the ignition on, the centre brake light ('third brake light') does not work. If the side stop lights are not working either, see Table I015

Results of the tests
1CHECK ON INDIVIDUAL LIGHTSAll OKProblems metOperation
Check the condition of the third brake lightContinue to Step 2Third brake light not workingChange third brake light
2BRAKE LIGHTS SWITCH CHECKAll OKProblems metOperation
Check that the brake light switch is correctly fastened and working properlyContinue to Step 3Brake light switch faultyRenew or replace the brake light switch
3BRAKE LIGHTS ELECTRICAL CIRCUIT CHECKAll OKProblems metOperation

Check, in order:

  • third brake light fuse;
  • connections between DASHBOARD control unit and brake pedal switch;
  • connections between DASHBOARD control unit and bulb;
  • bulb earth See E2021 BRAKE LIGHTS
Continue to Step 4Defective componentReplace the component involved (if a fuse is involved, search for the cause of the problem)
Connections brokenRestore the connections: See E2021 BRAKE LIGHTS
Faulty earthRestore the earth contact See E2021 BRAKE LIGHTS
4CHECKING FACIA CONTROL UNITAll OKProblems metOperation
Check the continuity of the facia control unit internal circuit See E2021 BRAKE LIGHTSContinue to Step 5Facia control unit circuit brokenChange the facia junction unit
5CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis

Parts & tools for this job For 2003 Lancia Ypsilon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.