Lights check not working
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Lights › Lights check not working
Fault diagnosisLights check not working
LIGHTS CHECK NOT WORKING
With the ignition on, the Body Computer does not detect faults in the operation of the side lights, stop lights or rear fog lamps, despite the fact that they are not working, and the 'Light failure' warning light does not come on
| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the Examiner to the diagnostic socket Check light operation on the instrument panel while in active diagnosis mode | Continue to Step 2 | Light failure warning light does not come on | Replace instrument panel | |
| Light failure warning light comes on | Continue to Step 2 | |||
| 2 | CHECK ON BODY COMPUTER ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
check
| Continue to Step 3 | Connections not correct | Restore the connections: See E2010 SIDE LIGHTS / NO. PLATE LIGHTS | |
| Connections not correct | Restore the correct supply See E2010 SIDE LIGHTS / NO. PLATE LIGHTS | |||
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job For 2003 Lancia Ypsilon
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Lancia Ypsilon
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.