Workshop Manuals Factory service & repair Land Rover
Land Rover Defender V8i Workshop Manual Supplement11 · Manifold and exhaust system
11 · Engine

Intermediate pipe tail pipe (page 2 of 3)

Make
Land Rover
Model
Defender V8i Workshop Manual Supplement
Section
Repair
Manifold and exhaust systemIntermediate pipe tail pipe · page 2 of 3

INLET MANIFOLD GASKET 10. Remove RH rocker cover.

  1. Remove and discard rocker cover gasket.

Service repair no - 30.15.08 12. Remove screw securing dipstick tube to LH

Remove

  1. Disconnect battery negative lead.
  2. Drain cooling system. See COOLING SYSTEM, Adjustment, drain and refill
  3. Remove fuel rail. See FUEL SYSTEM, Repair, fuel rail
  4. Remove breather hose from RH rocker cover.
  5. Remove bolt securing coolant pipe brackets to RH rocker cover and collect nut.
  6. Loosen clip and disconnect coolant return hose from inlet manifold.
  7. Remove 4 bolts securing engine harness to inlet manifold.
Remove 4 bolts securing engine harness to inlet manifold.
  1. Remove 4 bolts securing LH rocker cover to
  2. Remove LH rocker cover.
  3. Remove and discard rocker cover gasket.
  4. Disconnect coolant temperature sensor
  5. Loosen clip and disconnect coolant return hose
  6. Release 8 spark plug leads from guide clips and
  7. Release coolant pipe bracket from manifold.

disconnect leads from spark plugs.

  1. Loosen clip and remove plenum chamber
Loosen clip and remove plenum chamber
  1. Remove 4 bolts securing RH rocker cover to cylinder head.
  2. Remove 12 bolts securing inlet manifold in the

rocker cover.

rocker cover.

cylinder head.

multiplug.

from inlet manifold.

coolant hose from inlet manifold.

coolant hose from inlet manifold.

sequence shown.

Parts & tools for this job For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.