Workshop Manuals Factory service & repair Land Rover
Land Rover Defender V8i Workshop Manual Supplement16 · Steering
16 · Steering & suspension

Power steering pump (page 2 of 2)

Make
Land Rover
Model
Defender V8i Workshop Manual Supplement
Section
Repair
SteeringPower steering pump · page 2 of 2

Refit

  1. Clean mating faces of PAS pump and engine.
  2. Fit PAS pump and engine lifting bracket to engine.
  3. Fit and tighten bolts securing PAS pump to engine to 35 Nm (26 lbf.ft).
  4. Remove plugs.
  5. Connect PAS pipe to pump and tighten union to 20 Nm (15 lbf.ft).
  6. Connect PAS hose to pump and secure with clip.
  7. Position pulley to PAS pump.
  8. Coat threads of PAS pump pulley bolts with Loctite 242.
  9. Restrain pulley using Allen key and tighten bolts to 10 Nm (7 lbf.ft).
  10. Fit drive belt. See ELECTRICAL, Repair, Auxiliary drive belt; Refit
  11. Reconnect battery negative lead.
  12. Bleed power steering system. See Adjustment, power steering system - bleed
  13. Remove container.

Parts & tools for this job For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.