Description and operation (Mirrors Operation): Description and operation

Ignition switch supply With the ignition switch in position II, the feed from fusible link 8 passes through the ignition switch to the passenger compartment fusebox on a W wire. The feed continues through fuse 30 in the passenger compartment fusebox and is connected on a GLG wire to the electric mirror switch.

Mirrors Operation

Driver mirror adjustment The mirror switch is connected on a B wire, via header C0760, to earth header C0017 LHD/C0018 RHD.

Vertical - Up

When the electric mirror switch is operated in the up position the feed from fuse 30 passes through the switch contacts and is connected to the mirror vertical adjustment motor. The wire connections are as follows:

• On LHD vehicles, the connection from the switch is on a BK wire to the motor.
• On RHD vehicles, the connection from the switch is on a BN wire to connector interface C0460-7/C0733-7. From the connector interface the connection continues to the motor on a BK wire.

The earth path for the motor is connected on an SW wire, via splice joint A9 and earth header C0285 LHD/C0292 RHD, to the mirror switch.

Vertical down When the electric mirror switch is operated in the down position the feed from fuse 30 passes through the switch contacts and is connected to the mirror vertical adjustment motor on an SW wire, via splice joint A9 and header joint C0285 LHD/C0292 RHD.