Interior Lamps Operation (Description and operation)

Interior Lamps Operation

Vanity and rear view mirror With the ignition switch in position I or II, the feed from fusible link 7 passes through the auxiliary circuits relay contacts and is connected on a WG wire to the passenger compartment fusebox where it passes through fuse 15. From fuse 15 the feed is connected on an LGW wire, via header C0286 LHD/ C0291 RHD to the interior mirror.

The power supply from fuse 15 in the passenger compartment fusebox supplies power to the interior rear view mirror. The automatic dip function of the mirror can be selected on or off on the mirror. The mirror is connected on a B wire to earth header C0706.

When reverse is selected, the feed from fuse 25 in the passenger compartment fusebox passes through the reverse switch contacts and is connected, via header C0287 LHD/C0294 RHD to the interior mirror on a GN wire. This supplies power to the interior mirror and changes it from its dipped to normal condition when applicable.

The interior lamps operate independent of the ignition switch position and can be operated manually or automatically when a door is opened.