Workshop Manuals Factory service & repair Land Rover
01 Introduction02 Fuse details03 Earth points and header joints04 Description and operation05 Connectors
Land Rover Discovery II Electrical Library (1999-2003)04 · Description and operation
04 · General

Description and operation (Sunroof): Description and operation

Make
Land Rover
Model
Discovery II Electrical Library
Year
1999–2003
Section
Description and operation › Sunroof
Description and operationSunroof

Sunroof

Sunroof Description

Electric sunroofs are fitted at the front and rear of the vehicle. Both sunroofs are electrically operated. Switches on the front overhead console control operation of the front and rear sunroofs.

The rear sunroof can be operated by a switch located in the rear overhead console. The switch is only operative when not disabled by the rear sunroof isolation switch located in the front overhead console.

Sunroof Supply

Circuit supply A feed from the battery positive terminal is connected on an R wire to the engine compartment fusebox where it passes through fusible links 1, 6 and 8. Fusible links 1 and 6 are connected in series.

The feed from fusible links 1 and 6 is connected on an NU wire to the passenger compartment fusebox where it passes through fuse 12. The feed is connected from fuse 12 to supply a continuous battery feed on an NR wire to the sunroof ECU pin C0785-3.

The feed from fusible link 8 is connected on an NW wire to the passenger compartment fusebox and from the fusebox to the ignition switch on an N wire.

Ignition switch supply With the ignition switch in position II, the feed from fusible link 8 passes through the ignition switch to the passenger compartment fusebox on a Y wire, where it passes through fuse 29. The feed is connected from fuse 29 to the Body Control Unit (BCU) pin C0660-1 on a GU wire.

Parts & tools for this job For 1999 Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.