Discovery II
ENGINE - V8
12-2-32 REPAIRS
9. Fit alignment tool LRT-12-001 to spigot
bearing in crankshaft.
10. Fit drive plate onto tool LRT-12-001 ensure
side marked 'flywheel side' is towards flywheel.
11. Fit clutch cover and locate on dowels.
12. Fit clutch cover bolts and tighten in diagonal
sequence to 40 Nm (30 lbf.ft).
13. Fit gearbox assembly.
Plate - drive - automatic
$% 12.53.13
Remove
Note: Later engines are fitted with a modified
starter ring gear which incorporates the reluctor
plate, spacer and hub. The modified ring gear
may be fitted as a replacement to early
engines.
1. Remove automatic gearbox.
- 24, REPAIRS, Gearbox - convertor and
transfer gearbox - V8.
2. Remove 2 bolts securing CKP sensor cover.
3. Remove CKP sensor cover.
4. Remove 2 nuts securing CKP sensor.
5. Remove CKP sensor.