Discovery II
HEATING AND VENTILATION
80-26
REPAIRS
Blower assembly
$% 80.20.12
Remove
1. Remove 4 studs securing toe board and
remove toe board.
2. Remove 4 screws securing glove box, release
catch and remove glove box.
3. Disconnect battery earth lead.
4. Disconnect multiplugs from blower motor.
5. Remove 8 bolts securing passenger side of
fascia panel.
6. Carefully ease fascia away from bulkhead
7. Remove 3 bolts securing blower motor support
bracket and remove bracket.
8. Remove 2 nuts securing motor assembly.
9. Release blower motor assembly from heater
and manoeuvre from under fascia.
Refit
1. Position blower motor assembly under fascia
and locate to heater casing.
2. Position support bracket, fit and tighten nuts
and bolts.
3. Align fascia, fit bolt to support bracket and
tighten to 26 Nm (19 lbf.ft).
4. Connect multiplugs to blower motor.
5. Connect battery earth lead.
6. Fit glove box, align hinges and tighten screws.
7. Position toe board and secure with studs.