Heater Control Cables - Repairing Guide - Discovery II
HEATING AND VENTILATION
REPAIRS
80-15
REPAIRS
Heater control and fan switch
$% 80.10.02
Remove
1. Remove louvre panel assembly.
REPAIRS, Louvre panel assembly - centre
fascia.
2. Release temperature and air distribution cable
abutments from heater control housing and
disconnect inner cables from controls.
3. Disconnect multiplugs from switches.
4. Disconnect multiplug from control illumination.
5. Remove heater control.
6. Remove 3 switches from heater control.
Refit
1. Fit switches to heater control housing.
2. Position heater control assembly and connect
multiplugs to switches and illumination.
3. Connect heater control cables and secure
outer cable abutments to casing.
REPAIRS, Louvre panel assembly - centre
fascia.
Cables - heater control
$% 80.10.06
Remove
1. Driver temperature control and air flow
control cables:Release fixings and lower
fascia fuse box access cover.