Discovery II
HEATING AND VENTILATION
REPAIRS
80-19
Servo - air distribution control
$% 80.10.30
Remove
1. Disconnect battery earth lead.
2. RHD models: Remove heater assembly.
REPAIRS, Heater assembly - models with
air conditioning.
3. LHD models: Remove heater motor assembly.
4. Release clip securing operating lever and
release the lever from linkage.
5. Remove 3 screws securing servo support
bracket to casing and release servo.
6. Disconnect multiplug from servo and remove
servo.
7. Release clip securing operating lever to servo
and remove lever.
8. Remove 2 screws securing support bracket
and remove support bracket.
Refit
1. Position support bracket to servo and secure
with screws.
2. Position servo lever to servo and secure clip.
3. Connect multiplug to servo.
4. Position servo to casing and secure with
screws.
5. Connect operating lever to servo and secure
with clip.
6. RHD models: Fit heater assembly.
REPAIRS, Heater assembly - models with
air conditioning.
7. LHD models: Fit heater motor assembly.
8. Connect battery earth lead.