Discovery II
HEATING AND VENTILATION
80-16
REPAIRS
2. Passenger temperature control cable:
Remove 4 screws securing glove box, release
catch and remove glove box.
3. Remove louvre panel assembly.
REPAIRS, Louvre panel assembly - centre
fascia.
4. Release control cable abutment from control
housing and disconnect inner cable from
control.
5. Release clip securing control outer cable to
heater case and disconnect inner cable from
flap lever.
6. Remove control cable.
Refit
1. Fit new control cable, connect inner cable to
control and secure abutment to control
housing.
2. Fit other end of inner cable to flap lever.
3. Position control to maximum heat for
temperature control cables or demist for air
flow control cable, hold flap lever in fully closed
position and secure outer cable in clip on
heater casing.
4. Refit louvre panel assembly.
REPAIRS, Louvre panel assembly - centre
fascia.
5. Driver temperature and air flow control
cables: Close fuse access cover and secure
fixings.
6. Passenger temperature control cable: Refit
glove box and secure with bolts.