Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)10 · Fuel delivery system
10 · Engine

Fuel tank draining (page 2 of 2)

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs
Fuel delivery systemFuel tank draining · page 2 of 2
Diagram
  1. Release clip from breather hose and disconnect breather hose from filler neck.
Release clip from breather hose and disconnect breather hose from filler neck.
  1. Remove bolt securing filler neck to body
  2. Release clip securing neck assembly to tank.
  3. Disconnect filler from tank.
  4. Remove filler neck assembly.

Refit

  1. Position filler neck, connect to tank, fit and secure clip.
  2. Fit tighten bolt securing filler neck to body and tighten to 9 Nm.
  3. Connect breather hose to filler neck, fit and secure clip.
  4. Position filler neck to fuel cap aperture and fit locking ring.
  5. Fit rear wheel arch liner. See BODY, Repairs.
  6. Replenish fuel if necessary.
  7. Fit filler cap.
  8. Connect battery earth lead.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.