Freelander Service Procedures
CHARGING AND STARTING
REPAIRS
86-1-3
REPAIRS
Alternator - Td4
$% 86.10.02
Remove
1. Disconnect battery earth lead.
2. Drain cooling system.
ADJUSTMENTS, Coolant - drain and refill.
3. Models with A/C: Remove compressor drive
Drive belt - compressor - Td4.
4. Remove 3 bolts securing coolant rail to sump
and cylinder block.
CAUTION: Care must be taken to ensure
that oil or fluid does not enter or
contaminate the alternator.
5. Models with A/C: Loosen bolt securing
compressor support bracket to sump, do not
remove.
6. Models with A/C: Remove 3 bolts securing
compressor to mounting bracket, release
support bracket and tie compressor aside.
7. Models with A/C: Remove 3 bolts and bracket,
securing compressor mounting to casting on
cylinder block.
8. Disconnect alternator multiplug.
9. Remove nut securing battery cable to alternator
and remove cable.
10. Remove 3 bolts and remove alternator.
M86 5309
M86 5311