Freelander Service Procedures
CHARGING AND STARTING
86-1-4
REPAIRS
Refit
1. Clean alternator mounting points.
2. Fit alternator to mounting bracket.Tighten M10
bolt to 45 Nm (33 lbf.ft) and M8 bolts to 25 Nm
(18 lbf.ft).
CAUTION: Ensure upper bolt is fitted prior
to assembly.
3. Connect alternator multiplug.
4. Fit battery cable to alternator terminal and
tighten to 10 Nm (7.5 lbf.ft).
5. Models with A/C: Clean A/C compressor and
housing mating faces, dowels and dowel holes.
6. Models with A/C: Fit bolts and compressor
mounting to casting, tighten to 25 Nm (18 lbf.ft).
7. Models with A/C: Position A/C compressor, fit
bolts and tighten to 25 Nm (18 lbf.ft).
8. Models with A/C: Align compressor support
bracket to sump and tighten bolt to 10 Nm (7.5
lbf.ft).
9. Fit lower coolant rail to sump and tighten bolts
to 10 Nm (7.5 lbf.ft).
10. Fit compressor drive belt.
Drive belt - compressor - Td4.
11. Refill cooling system.
ADJUSTMENTS, Coolant - drain and refill.
12. Connect battery earth lead.