Freelander Service Procedures
ENGINE MANAGEMENT SYSTEM - SIEMENS
18-3-16 REPAIRS
Sensor - throttle position (TP) - NAS -
from 03MY
$% 19.22.49
Remove
1. Ensure ignition is switched off.
2. Remove 2 nuts and release throttle pedal and
TP sensor assembly from studs.
3. Disconnect multiplug from TP sensor.
4. Remove throttle pedal and TP sensor
assembly.
Refit
1. Position throttle pedal and TP sensor assembly
and connect multiplug.
2. Fit throttle pedal and TP sensor assembly to
studs and tighten nuts to 25 Nm (18 lbf.ft).