Freelander Service Procedures
FRONT SUSPENSION
REPAIRS
60-3
Bearing - hub
$% 60.25.14
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel.
3. Release stake in drive shaft nut.
4. With an assistant applying brakes, remove and
discard drive shaft hub nut.
5. Remove clip securing RH brake hose to
support bracket, release hose from bracket.
Release ABS sensor and pad wear sensor
harnesses from bracket.
6. Remove 2 bolts securing brake caliper to hub.
Release caliper from hub and tie aside.
CAUTION: Do not allow caliper to hang on
brake hose.
7. Mark brake disc to hub relationship.
8. Remove 2 screws securing brake disc and
remove brake disc.