Freelander Service Procedures
FRONT SUSPENSION
60-4
REPAIRS
9. Remove 2 nuts and bolts securing hub to
damper.
10. Release hub from damper.
11. Release drive shaft from hub.
12. Restrain hub from rotating and remove nut from
lower swivel joint.
13. Break taper joint using LRT-57-043.
14. Remove swivel hub.
NOTE: Do not carry out further dismantling if
component is removed for access only.
15. Remove 3 bolts securing brake disc shield.
16. Position hub assembly to press, support on
tools LRT-54-017 and press out drive flange
using tool LRT-54-014.
17. Remove brake disc shield.
NOTE: Outer bearing track will remain on drive
flange.